AMA Pro Flat Track » Springfield Mile II
 
 

Hot Product: Power Commander V

NEWS February 8, 2012


Hot Product: Power Commander V

Photo Provided by Dynojet

 

The following is a product placement article written by Dynojet, a proud contingency partner of AMA Pro Road Racing.


Find Out More

 

     

 

Order Yours Now At:

     

or

   

The New Power Commander V is loaded with tons of new features, and is available for most of today's fuel injected models. Below you will find some Power Commander V features.

Features:

  • Reduced size from PCIIIusb (less than half of the size of PCIII)
  • USB powered from computer (9 volt adapter is no longer needed for programming)
  • 2 position map switching function built in (map switch not included)
  • Gear input (allows for map adjustment based on gear and speed)
  • Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
  • With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
  • Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
  • 10 throttle position columns (up from 9 on PCIIIusb)
  • Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)

Power Commander V with Built In Ignition Control

On select models, gain control over fuel delivery AND timing with the new Power Commander V with fuel and ignition control. The best of both worlds, now you can realize all the benefits of the Power Commander V and the Ignition Module 5 wrapped in a single enclosure. This Power Commander V is available for select twin cylinder engines.

  • Retains all of the standard Power Commander V fuel control features
  • Allows +/- 20 degrees of timing adjustment
  • Map Switch Input – change maps on the fly
  • Adjust timing per cylinder
  • Raise your Rev Limit (only available on select models)
  • Built In Launch Limiter

Power Commander V - PTi

On select models a new version of PCV is now available that’s perfect for forced induction applications. This new unit, PCV-PTi, comes with a Bosch 3 bar MAP/Temp sensor as part of the PCV harness for expanded capabilities built into the control center software. res.

The PTi version of the PCV gives you the ability to modify your fuel curve based off a pressure (boost) table and/or temperature table. The pressure table gives you 3D mapping capability based on boost vs RPM, while the temperature table gives you 2D mapping capability with up to 50 points of adjustment.

This new version of the Power Commander V is perfect for turbocharged or supercharged applications looking for precision, control, and reliability.

Power Commander V Ignition Module

Designed to be used with the Power Commander V. Gain control over your spark advance curves and tune for maximum performance. 

  • Allows +/-20 degrees of timing adjustment
  • Adjust timing per cylinder
  • Adjust timing per gear
  • Raise your Rev Limit (only available on select models)
  • Adjust timing based on temperature or boost inputs
  • Built In Launch Limiter
  • Individual Cylinder Timing
  • Gear Position Timing
  • Boost/Nitrous Retard Timing
  • Pit Lane Limiter

What's your take?

AMA Pro Road Racing on Facebook

What do you like most about the 2012 Suzuki GSX-R1000? Greg White was able to show a few differences between the 2011 AMA Pro National Guard Suzuki GSX-R1000 SuperBike and the 2012 model in a new Paddock Chatter

Click here to comment external link)

Disclaimer: The views and opinions of the authors of product placements published on this website do not necessarily state or reflect the opinion of AMA Pro Racing.


blog comments powered by Disqus
  • Cardo Systems, Inc.
  • Clearwater Lights
  • Cortech
  • Dunlop
  • GoPro
  • Harley-Davidson
  • KYMCO
  • MotoBatt
  • Racersites
  • Saddlemen
  • Sunoco
  • Vance and Hines